Provide 15 and 30 degree increments in addition to existing 45 and 90 when using Line Draw
Kurt Wilson
When using the Line Draw tool, it would be nice to have 15 and 30 degree options by default in addition to the 45 and 90 degree options that are currently available.
Comments
A typical angle in homes or residential properties are 45 or 22.5, every no and then you come across an odd angle.
The need for this comes up when a user has an angle besides 22.5, 45 or 90. After that odd angle is used, every wall after that has to be adjusted manually since the 45 or 90 arrows draw off of the odd angle.
This would potentially clutter up the drawing screen with another eight arrows. For the relatively few times an angle other than 90 or 45 is required, the angle can be changed by moving the line with a finger.
What Chris said.
This one is not needed... it can be done by measuring two points (both sides of the angle) and deleting the middle line. I vote to leave it out unless you can come up with an ingenious way to be able to write in the desired angle... then that would be cool.
Please sign in to leave a comment.